Tap and pump 12 volt

This great package consists of a pump, tap and a mounting bracket for the pump. It gives you powered water flow to your sink with the minimum of fuss. The pump is operated by turning on the switch on the tap. 

The pump must be below the water tank and must be permanently primed. This means the water outlet from the tank must be at the base of the tank and water must flow down to the pump. The pump will then pump to a maximum of 2 metres in height. The shorter you can keep the height between the pump and the tap the greater the pressure.

Stainless fixing screws are supplied for both the pump bracket and the tap. The Tap spout will swivel through 360 degrees. 

Capacity 6.6litres per minute.
Maximum lift 2 metres
Suits hose diameter 10mm
12volts, 1.5amps
Pump dimensions; diameter 55mm, length 115mm
Pump weight 270 grams
Tap base dimensions, length 90mm width 43mm